A scraper is a type of construction machinery widely used at construction sites such as mines and tunnels, primarily for...

Used for mining and conveying slag material. To ensure the normal operation and safety of the slag scraper, the following

Some precautions for using the slag removal machine:

Pre-operation Check: A comprehensive inspection is mandatory before operating the slag removal machine, including the mechanical section

Are the parts securely fastened, is the lubrication sufficient, and are the electrical equipment functioning properly? Ensure the mechanical parts

Maintain a stable state to avoid malfunctions during operation.

Operation Procedure: Strict adherence to the operation procedure is required when operating the slag removal machine; beginners should become familiar with the operation procedure before operating.

Operate under the guidance of professionals from Cheng.

Safety Protection: When using a slag removal machine, appropriate safety equipment such as a helmet should be worn.

Protective glasses, gloves, etc.

Avoid over-mining: Over-mining should be avoided during the mining process to prevent damage to underground facilities.

Or cause damage to the surrounding environment.

Caution: When operating the slag removal machine, attention should be paid to surrounding equipment and personnel to ensure that

Collision or injury accidents may occur.

Regular maintenance and care: During the operation of the slag removal machine, regular maintenance and care should be conducted.

Ensure normal operation of the machinery. At the same time, replace damaged parts promptly to prevent malfunctions.

Expand.

Maintain vigilance: During operation, stay alert and immediately investigate if there are any abnormal sounds or odors.

Immediate shutdown for inspection.

Avoid Unauthorized Modifications: Unauthorized modifications of the slagging machine are strictly prohibited to prevent safety accidents caused by improper modifications.

Post-operation inspection: After operation, a comprehensive check of the slag removal machine should be conducted, record the usage, to enable timely detection and handling of potential issues.

These are some precautions for using a slagging machine, hoping they are helpful to everyone.

In case of any issues during use, professional assistance should be sought.

Daily maintenance and repair methods for slag removers include the following:

Cleaning: After each use of the slag removal machine, it is necessary to clean the dust, oil stains, and other impurities from the equipment to ensure

Maintain equipment cleanliness.

Inspection: Regularly inspect the various components of the slag scraper, such as tires, bearings, chains, etc., to ensure their

Operating normally.

Lubrication: Regularly lubricate the scraper's bearings, chains, etc., to reduce wear.

Check and tighten all fasteners of the slag removal machine, such as screws and bolts, ensuring they are securely fastened.

Replacement: Replace parts with severe wear promptly to prevent affecting the normal operation of the equipment.

Turn.

Adjustments: For parts requiring adjustment, such as tire pressure and bearing clearance, they need to be

Adjust in time to ensure the normal operation of the equipment.

Maintenance: Conduct comprehensive inspections and maintenance of the slag scraper regularly to ensure normal operation and

Extend service life. That's all about the daily maintenance and repair methods of the slag scraper, it is recommended to use

Observe the equipment's working status during the process, and promptly identify and address any issues.

Seven proper usage methods for the inclined shaft slag removal machine are as follows:

Turn on the main power switch.

B: After the button indicator light turns on, start the oil pump and fan. If it's the first time using or after re-wiring

Power on, the motor oil pump rotation sequence and whether the electrical lights are correct should be judged. If the sequence is incorrect

Yes, the machine cannot be started. C: The motor should be operated normally for 5 seconds before using it under pressure.

After each use of the inclined shaft slagging machine, it is necessary to clean the dust, oil stains, and other impurities on the equipment.

Maintain the cleanliness of the equipment.

E: Regularly inspect the various components of the inclined shaft scraper, such as tires, bearings, chains, etc., to ensure

It operates normally.

Regularly lubricate the bearings, chains, and other parts of the inclined shaft slag removal machine to reduce wear.

Check all the fasteners of the inclined shaft slag removal machine, such as screws and bolts, to ensure they are securely fastened.

Mining Excavator Loader, abbreviated as "Shovel Loader"

Shandong Mingshun Machinery's ZWY series wheel-type and track-type scraper machines

The Zha Ji and Type 100 Track-Type Fire Extinguishing Vehicle have received widespread praise and favor from users.

Lai. Shovel machines, rubber tire scraper shovels, crawler belt shovels, crawler scraper

The scraper machine features four major systems: hydraulic walking, excavation and collection, conveying mechanism, and electrical control.

Partial composition. The whole vehicle hydraulic system is powered by an electric motor.

Oil pump, flowing through the actuating valve to the hydraulic cylinder, passes through the radiator and returns to the hydraulic oil tank.

Hydraulic energy of the pressure pump is converted into mechanical energy. The hydraulic walking device of the slag removal machine adopts foreign technology.

Hydraulic travel system of a slider loader, featuring full-time four-wheel drive, full gear box drive

Sealed operation extends service life; two-stage reduction achieves speed reduction and torque increase, which is effective.

The cleaning of tunnel slag in mines. Whether walking or cleaning the bottom, there is no alternative.

Picky. The conveying system employs two types of conveyors, belt and scraper, belt conveying

The organization uses vehicle frame, rolling bearing roller, roller bracket, electric drum,

Pre-passive roller, bearing base, etc.组成。The conveying frame can be raised at the rear and lowered at the front, with adjustable height.

Adjustable design, it can handle装载mining trucks, tricycles, or quadruped vehicles with ease. The scraper conveyor belt speed is 0.8 m/s, with a belt configuration of 6-grade PVG grease-resistant belt.

Green belt, high efficiency and wear-resistant, high efficiency. Excavator electric control with electric leakage protection, button open

Safety and stable, composed of contactors, junction terminals, and low-voltage transformers.

Set protection. At the same time, the scraper also features front and rear LED headlamps for illumination.

Broad view during work.