A scraper is a type of construction machinery widely used at construction sites such as mines and tunnels, mainly for...

Used for mining and conveying slag materials. To ensure the normal operation and safety of the slag scraper, the following

Some precautions for using a slag removal machine:

Pre-operation Check: A comprehensive check must be conducted before operating the slag removal machine, including the mechanical department

Are the parts securely fastened, is the lubrication sufficient, and are the electrical equipment functioning normally? Ensure the mechanical parts are in good condition.

Maintain a stable state to avoid malfunctions during operation.

Operation Procedure: Strict adherence to the operation procedure is required when operating the slag removal machine. Beginners should become familiar with the operation procedure.

Operate under the guidance of professionals in the field.

Safety Protection: When using a slag scraper, appropriate safety equipment such as a helmet should be worn.

Protective glasses, gloves, etc.

Avoid over-mining: Over-mining should be avoided during the excavation process to prevent damage to underground facilities.

Or cause damage to the surrounding environment.

Attention Operation Scope: When operating the slag removal machine, attention should be paid to the surrounding equipment and personnel to ensure that

Collision or injury accidents may occur.

Timely maintenance and care: Regular maintenance and care should be carried out during the operation of the slag scraper.

Ensure the normal operation of the machinery. At the same time, replace damaged parts promptly to prevent malfunctions.

Expand.

Maintain vigilance: Remain alert during operation; if any abnormal sounds or odors are detected, act immediately.

Immediate shutdown inspection.

Avoid Unauthorized Modifications: Unauthorized modifications of the slagging machine are strictly prohibited to prevent safety accidents caused by improper modifications.

Post-operation Check: After the operation, a comprehensive check of the slag remover should be conducted, record the usage, to ensure potential issues are identified and addressed promptly.

Here are some precautions for using slag removers, hoping they will be helpful to everyone.

In case of any issues during use, professional assistance should be sought.

Daily maintenance and repair methods for slag removers include the following:

Cleaning: After each use of the slag removal machine, it is necessary to clean the dust, oil stains, and other impurities from the equipment.

Maintain equipment cleanliness.

Inspection: Regularly inspect the various components of the slag scraper, such as tires, bearings, chains, etc., to ensure their

Operating normally.

Lubrication: Regularly lubricate the scraper's bearings, chains, etc., to reduce wear.

Secure: Check all fasteners of the scraper, such as screws and bolts, to ensure they are securely fastened.

Replacement: Replace worn-out parts promptly to prevent affecting the normal operation of the equipment.

Turn.

Adjustments: For parts requiring adjustment, such as tire pressure, bearing clearance, etc., it is necessary to

Adjust timely to ensure the normal operation of the equipment.

Maintenance: Conduct comprehensive inspections and maintenance of the slag scraper regularly to ensure normal operation and

Extend service life. That's all about the daily maintenance and repair methods of the slag scraper, it is recommended to use

Observe the equipment's operating status during the process, and promptly identify and address any issues.

Seven proper methods for using inclined shaft slagging machine:

Turn on the main power switch.

B: After the button indicator light turns on, start the oil pump and fan. If it's the first time using or after re-wiring

Power on, the motor oil pump rotation sequence and whether the electrical lights are correct should be judged. If the sequence is not correct,

Yes, the machine cannot be started. C: The machine can be used under pressure only after 5 seconds of normal startup.

After each use of the inclined shaft slagging machine, it is necessary to clean the dust, oil stains, and other impurities on the equipment.

Maintain the cleanliness of the equipment.

E: Regularly inspect the various components of the inclined well scraper, such as tires, bearings, chains, etc., to ensure

It is operating normally.

F: Regularly lubricate the bearings, chains, and other components of the inclined well scraper to reduce wear.

Check all the fasteners of the inclined shaft scraper, such as screws and bolts, to ensure they are securely fastened.